牌号 hpb63-3(含铅黄铜)棒材
中国isc t34700
对应标准 gb /t 5231-2012
加工铜及铜合金牌号和化学成分
性能 冲击韧性 易切削性
说明 延展性好,深冲性能好。应用于钟表零件、汽车、拖拉机及一般机器零件。铜切削加工性能优良,有高的减摩性能,用于钟表结构件及汽车拖拉机零件。抗拉强度 σb (mpa):≥390,退火温度620~650℃。
范围:
①本标准规定了加工铜及铜合金的牌号和化学成分
②本标准适用于以压力加工方法生产的铜及铜合金加工产品及其所用的铸锭和坯料
hpb63-3 化学元素 成分含量(%)
成分 fe cu pb zn
最 小值 - 62 2.4 31.15
最 大 值 0.1 65 3 35.6
gb hpb63-3 gb/t 13809 mechanical
yield tensile impact elongation reduction in cross section on fracture as-heat-treated condition brinell hardness (hbw)
rp0.2 (mpa) rm (mpa) kv/ku (j) a (%) z (%)
447 (≥) 459 (≥) 24 11 41 solution***aging, annealing, ausaging, q+t,etc 332
gb hpb63-3 gb/t 13809 physical
the physical properties of gb hpb63-3 gb/t 13809 steel incorporate high quality, low weight, solidness, ductility***protection from erosion.
temperature modulus of elasticity mean coefficient of thermal expansion 10-6/(°c) between 20(°c) and thermal conductivity specific thermal capacity specific electrical resistivity density poisson’s coefficient, ν
(°c) (gpa) (w/m·°c) (j/kg·°c) (ω mm2/m) (kg/dm3)
14 - - 0.14 -
835 544 - 42.3 412 -
686 - 14 14.2 443 444
gb hpb63-3 gb/t 13809 processing service