万通商务网
首页-产品目录

供应进口杜笙矮床酸阻滞酸去除回收树脂A-32FM

其它参数:
产品介绍:
杜  笙tulsion® a-32 fine mesh
  iso-9001/iso-14001/ohsas-18000  
  quot;坚韧胶凝体“精细型强碱  性阴离子交换树脂ii型
  tulsion®  a-32 fine mesh 是一款包含季胺  ii型官能团的聚苯  乙烯架构的“坚韧胶凝体”强碱  型阴离子交换树脂。
  tulsion®  a-32 fine mesh 由于本身的无裂纹特性而具有优良的物理特性。
  tulsion®  a-32 fine mesh比i型树脂的碱  性稍低,因此在和i型树脂有相同的再生程度的时候,有更高的再生效率和操作能力。
  tulsion®  a-32 fine mesh 主要应用在强酸  和弱酸  的去除,并且再生效率高。然而由于其较低的碱  性,当和氢型强酸  型阳离子交换树脂tulsion® t-42一起用在双床系统上时,硅的泄漏量稍高于i型树脂。它可以在较大的ph范围和温度条件下运行。
  tulsion®  a-32 fine mesh的球面是无裂纹的,因此它表现出非常高的球强度。
  tulsion®  a-32 fine mesh 出厂为氯  型。
  典型特性(typical characteristics): tulsion®  a-32 fine mesh  
  类型/type  强碱  型阴离子交换树脂/strong base anion exchange resin 
  主体结构/matrix structure  聚苯  乙烯共聚物/polystyrene copolymer
  官能团/functional grou  季胺  ii型/quatemary ammonium type ii  
  离子形态/ionic form  氯  型/chloride
  物理型式/physical form  湿润球状/moist spherical beads 
  目数/screen size uss (湿)  50  to  140
  粒度/particle size(95% minm.)  0.1 - 0.3 mm 
  交换容量total exchange capacity(minm.)  1.3meq/ml
  膨胀率/swelling(approx)  cl- to oh- 12% 
  湿度/moisture content  47±3%
  反洗稳定密度/backwash settled density  690 - 720 gm/lit(43 - 45 lbs/cft)
  最大温度/maximum thermal stability  60℃(140℉)
  ph范围/ph range  0- 14
  溶解性/solubility  不溶/insoluble in all common solvent 
  
  
  操作温度/maximum operating temperature  60℃ max
  冲洗流速/rinse flow rate:  慢/slow  再生流速/at regeneration flow rate
  快/fast  工作流速/at service flow rate
  冲洗体积/rinse volume  4 - 10m3/m3
  测试(testing):  tulsion® a-32 fine mesh  
  离子交换树脂的抽样和测试是按标准的测试程序,即astmd - 2187和is - 7330,1998.
  包装(packing):  tulsion® a-32 fine mesh  
super sack  1000 lit  super sack  35 cft
ms drum  180 lit.  ms drum  7 cft
hdpe lines bag  25 lit.  hdpe lines bag  1 cft
  for handling, safety【敏感词】storage requirements please refer to the individual material safety data sheets available at our offices. the data included herein are based on test information obtained by thermax limited. these date are believed to be reliable, but do not imply any warranty【敏感词】performance guarantee. tolerances for characteristics are per bis/astm. we recommend that the user should determine the performance of the product by testing on his own processing equipment.
  for further information, please contact::

北京华豫清源国际贸易有限责任公司

免费会员

客服
登录
手机版 电脑版 下载安卓app 网址大全
万通商务网 版权所有©2020 h665.cn