pa66 444ahs bk152 增韧级,热稳定,高流量
zytel® 444ahs bk152 | pa66-i nylon resin
regional availability
north america, south【敏感词】central america
processing
injection moulding
delivery form
pellets
special characteristics
heat stabilised【敏感词】stable to heat
product text
common features of zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness【敏感词】toughness, good high temperature performance, good electrical and flammability properties, good abrasion【敏感词】chemical resistance. in addition, zytel® nylon resins are available in different modified【敏感词】reinforced grades to create a wide range of products with tailored properties for specific processes【敏感词】end-uses. zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.
the good melt stability of zytel® nylon resin normally enables the recycling of properly handled production waste. if recycling is not possible, dupont recommends, as the preferred option, incineration with energy recovery (-31kj/g of base polymer) in appropriately equipped installations. for disposal, local regulations have to be observed.
zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
zytel® 444ahs is a toughened, heat stabilised, black polyamide 66 resin for injection moulding. it is a high flow, processing friendly material.
injection molding
preprocessing
drying recommended = yes, if moisture content of resin exceeds recommended level
drying temperature = 80℃
drying time, dehumidified dryer = 2-4 h
processing moisture content = <0.2 %
processing
melt temperature optimum = 290℃
melt temperature range = 280-300℃
mould temperature optimum = 70℃
mould temperature range = 50-90℃
properties
mechanical properties |
dry / cond |
unit |
test standard |
tensile modulus |
2400 / 1100 |
mpa |
iso 527-1/-2 |
yield stress |
62 / 40 |
mpa |
iso 527-1/-2 |
yield strain |
5.5 / 15 |
% |
iso 527-1/-2 |
nominal strain at break |
25 / >50 |
% |
iso 527-1/-2 |
strain at break |
40 / * |
% |
iso 527-1/-2 |
thermal properties |
dry / cond |
unit |
test standard |
melting temperature,10℃/min |
260 / * |
℃ |
iso 11357-1/-3 |
temp. of deflection under load,1.8 mpa |
65 / * |
℃ |
iso 75-1/-2 |
coeff. of linear therm. expansion,parallel |
90 / * |
e-6/k |
iso 11359-1/-2 |
coeff. of linear therm. expansion,normal |
100 / * |
e-6/k |
iso 11359-1/-2 |
other properties |
dry / cond |
unit |
test standard |
water absorption,2mm |
1.3 / * |
% |
sim. to iso 62 |
density |
1110 / - |
kg/m3 |
iso 1183 |