光泽特性：1、印上就烤显平光
2、印上放置3小时再烤为干燥后为亮光
使用方式：丝印、移印。油墨与固化剂 添加比例为10：1，表干15-30分钟。金属产品烘烤120-150°c，30分钟后可完全干燥。玻璃产品烘烤100-120°c，30分钟完全干燥。强化亚克力及uv表面等塑胶产品烘烤80-100°c，30分钟完全干燥。
测试：产品从烤箱拿出来完全冷却之后可进行相应测试。
1. 划百格后使用3m胶纸拉，无掉色，脱落现象。
2. 使用99％无水酒精，500g力来回摩擦1000次，无变色，脱色等现象；
3. 使用25％的盐 酸 ，500g力来回摩擦一千次，无脱落，变色、脱色等现象；
4. 使用25％氢氧化钠溶液，500g力来回摩擦一千次，无脱落、变了、脱色等现象；
5. 使用100°c热水浸泡三小时，拿出后用手擦，无脱落，掉色等现象。
适用范围：
各种金属制品，玻璃制品，钢化玻璃（6h以下硬度），镀膜镜片，强化亚克力，uv喷油表面等产品。
环保检测：通过欧盟rohs检测标准，en-71等检测标准，环保保证产品。gloss characteristics: 1, printing on plain grilled significantly
2, printed on the place for 3 hours【敏感词】then baked for the dry light
use: screen printing, pad printing. ink【敏感词】curing agent to add the ratio of 10:1, the table to do 15-30 minutes. metal products bake 120-150 degrees c, 30 minutes after the c o mplete drying. glass products bake 100-120 degrees c, 30 minutes c o mpletely dry. to strengthen the surface of uv【敏感词】acrylic plastic products such as baking 80-100 ~ c, 30 minutes to dry c o mpletely.
test: the product can be taken out of the oven after the c o mplete cooling can be carried out the corresponding test.
the 1 row grid after using 3m tape pull, no fade, shedding.
2 the use of 99％ anhydrous alcohol, 500g force back【敏感词】forth friction 1000 times, no discoloration, discoloration【敏感词】other phenomena;
3 using 25％ hydrochloric acid, 500g force back【敏感词】forth friction one thousand times, no shedding, discoloration, discoloration【敏感词】other phenomena;
4 using 25％ sodium hydroxide solution, 500g force back【敏感词】forth friction one thousand times, no shedding, changed, decolorization【敏感词】other phenomena;
5 the use of 100 deg c hot water for three hours, take out after the hand rub off, discoloration【敏感词】other phenomena.
scope of application:
all kinds of metal products, glass products, tempered glass (6h following hardness), coated lenses, strengthen acrylic, uv injection surface products.
environmental testing: through the eu rohs testing standards, en-71【敏感词】other testing standards, environmental protection products.
免费会员